Creepet Digital Thermostat Temperature Controller and Timer for Reptiles, Amphibian,Seed Germination and Brewing,Aquarium Incubator, Ideal for Heating mat, -19 to 190 °F
CP-212 is a new one of developed timer and temperature controller series products which are applied to not only aquarium and reptile but also growing and brewing market. One channel is for temperature controlling. Another channel is for timer controlling. Main features: Big LCD display, friendly interface, easy to read, operates, and set the parameters.
CP-212 is a new one of developed timer and temperature controller series products which are applied to not only aquarium and reptile but also growing and brewing market.
One channel is for temperature controlling. Another channel is for timer controlling.
Main features: Big LCD display, friendly interface, easy to read, operates, and set the parameters. Waterproof temperature NTC sensor,wont run rusty.
Using real-time clock to control the light, simulating the day and night as real environment. Small and elegant appearance, can adopt attached on the glass, or stand on the table, or install into the aquarium and terrarium, fit for different operating requirements of users.
Specification:
1.Temperature Control Range: -19 ~ 190°F
2.Temperature resolution: 0.1
3.Accuracy: ±0.5
4.Working mode: Heating OR Cooling mode,Time control at the same time.
5.Time unit:Hour in 24:00 format
6.Relay Capacity:16A/1100V
7. Control load:≤1200W/110VAC
8.Input voltage:110V± 15 % (VAC), 50 HZ~60HZ
9.Outputs:Resistive load MAX 1100W; inductive load MAX 275W; incandescent bulb MAX 220W
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: YES
13.Timer setting:Day and Night time range(0:00-23:59)
14.Product size: 9.3 x 2.7 x 1.6 inch (23.5 x 6.8 x 4cm)
15.Probe Length: 6 feet,Power Cord Length: 3 feet
Parameters setting:
Parameters would be set according to the circular mode in the first time; All the parameters are set and saved instantly.
First of all,Press SET key for 3sec to enter Menu,after one mode setted,press SET one time enter the next,details please follow the USER MANUAL.
Product Features
- UNIQUE DESIGN:Elegant aluminized body with big LCD display,Inlaid and slotted design on both side,can adopt attached on the glass, or stand on the table, or install into the aquarium and terrarium, fit for different operating requirements of users.
- MULTI-FUNCTION OF USES:One channel for temperature controlling – heating or cooling,Another channel for time controlling – can set working time both day and night from 0:00-23:59
- EASY OF USE:Big LCD display indicate all the information can be checked even in the dark, Along with the setting Key on the right.
- WORKS INTELLIGENCE:Auto Turn on/off your heating/cooling equipment when the Probe detects the temperature is out of your setting range.Auto shut down the lighting equipment when time runs beyond the time range you set.
- RELIABLE AND LONG WARRANTY:16A relay more reliable than 10A in the market,control temperature from -19 ~190 190°F,One year warranty.
){kind=link}
also good for Aquarium tank I’m happy with this purchased. it’s as the second safety for my heater control and the chiller machine, my friend chiller machine resets to 50 Fahrenheit degree due to the power unstable went out and back on sometime, and costed him thousand dollar lost of fish and coral. thus, i learned that lesson from him and need to do something to prevent this disaster happen to me. furthermore, it has a timer controller for my light. perfect item which i needed.
Pretty good product Pretty good product just a little confusing with the setup, had to read the instructions couple times to get it , but so far so good will see how long it last.